I offer a full water softener installation service including the following: –
- Free site survey where needed.
- Installing a full-bore bypass set – 15mm, 22mm and 28mm depending on your pipework.
- Fitting a pressure limiting valve if incoming pressure is too high.
- Providing a hard feed where needed for outside taps and any drinking taps / filter systems you may have.
- Flexibility regarding the location of the softener to suit your needs, using custom inlet / outlet hoses. All options discussed on site survey as location will depend on a number of factors, including stopcock location.
- Fitting a drain connection, often onto a sink waste but other options are used too.
- Fitting an emergency overflow connection, normally out of external wall.
- Once installed the softeners is tested to make sure all new connections are good and that the softener is working correctly.
- Once the softener is installed you will have soft water normally within 2 days up to 2 weeks depending on your boiler systems.
This is just an overview and hopefully gives you an idea what is required for a water softener installation. Any questions please contact me.
Example of plumbing out kit used for softener drain connection. Many options available, depending on customers pipework.
Example of full bore bypass set used on all installations.
